Help needed to fill_between two curves

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Help needed to fill_between two curves

Akhilesh Nautiyal
Dear Sir/Madam,

                   I am plotting with matplotlib using two data files with different x and y ranges. I need to fill up the region between the two curves. I request you to kindly help me in this regard. I am attaching the files with
this e-mail. the plot range should be between x->0.93 to 1.0 and y->0 to 0.25.

Thanking you,
Sincerely,
akhliesh

--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: <a href="tel:%2B91-9445520847" value="+919445520847" target="_blank">+91-9549657939
***********************************************************************************************

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users

ns_r_N_46.dat (11K) Download Attachment
ns_r_N_55.dat (13K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Help needed to fill_between two curves

vincent.adrien@gmail.com
Hi Akhliesh,

For basic usage of Matpolotlib, the following tutorials may be good
starting points:
   * https://matplotlib.org/tutorials/introductory/pyplot.html
   * https://matplotlib.org/tutorials/introductory/usage.html
To enforce peculiar x- and y-ranges, I think that you may want to use
`ax.set_xlim` and `ax.set_ylim` (or `plt.xlim` and `plt.ylim` if you
prefer the interactive Pyplot interface rather than the object-oriented
one).

Besides, you may find the following example useful:
https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
to learn how to fill the aerea between 2 curves.

Hopefully this will help you a bit.

Best regards,
Adrien

On 05/24/2018 05:13 AM, Akhilesh Nautiyal wrote:

> Dear Sir/Madam,
>
>                     I am plotting with matplotlib using two data files
> with different x and y ranges. I need to fill up the region between the
> two curves. I request you to kindly help me in this regard. I am
> attaching the files with
> this e-mail. the plot range should be between x->0.93 to 1.0 and y->0 to
> 0.25.
>
> Thanking you,
> Sincerely,
> akhliesh
>
> --
> ***********************************************************************************************
> *    Dr. Akhilesh Nautiyal
> *   Assistant Professor
> *   Department of Physics
> *   Malaviya National Institute of Technology Jaipur
> *   JLN Marg Jaipur-302017
> *    Mo: +91-9 <tel:%2B91-9445520847>549657939
> ***********************************************************************************************
>
>
> This body part will be downloaded on demand.
>

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users
Reply | Threaded
Open this post in threaded view
|

Re: Help needed to fill_between two curves

Akhilesh Nautiyal
Dear Adrien,

         Thanks for the reply. I have tried all that. Actually in my case the two  curves have different size of abscissa and ordinates.  Suppose I make arrays like x1, y1 and x2, y2 from two data files
attached in my previous mail, the arrays x1 and x2 have different size and the arrays y1 and y2 have different size. 
I will be grateful if you can help me how to fill the area between these curves n this particular case.

With Regards,
akhilesh

On Thu, May 24, 2018 at 10:24 PM, [hidden email] <[hidden email]> wrote:
Hi Akhliesh,

For basic usage of Matpolotlib, the following tutorials may be good starting points:
  * https://matplotlib.org/tutorials/introductory/pyplot.html
  * https://matplotlib.org/tutorials/introductory/usage.html
To enforce peculiar x- and y-ranges, I think that you may want to use `ax.set_xlim` and `ax.set_ylim` (or `plt.xlim` and `plt.ylim` if you prefer the interactive Pyplot interface rather than the object-oriented one).

Besides, you may find the following example useful:
https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
to learn how to fill the aerea between 2 curves.

Hopefully this will help you a bit.

Best regards,
Adrien

On 05/24/2018 05:13 AM, Akhilesh Nautiyal wrote:
Dear Sir/Madam,

                    I am plotting with matplotlib using two data files with different x and y ranges. I need to fill up the region between the two curves. I request you to kindly help me in this regard. I am attaching the files with
this e-mail. the plot range should be between x->0.93 to 1.0 and y->0 to 0.25.

Thanking you,
Sincerely,
akhliesh

--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: +91-9 <tel:%2B91-9445520847>549657939
***********************************************************************************************


This body part will be downloaded on demand.





--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: <a href="tel:%2B91-9445520847" value="+919445520847" target="_blank">+91-9549657939
***********************************************************************************************

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users
Reply | Threaded
Open this post in threaded view
|

Re: Help needed to fill_between two curves

vincent.adrien@gmail.com
Hi Akhilesh,

Then I guess that you need to somehow interpolate your data to share the
same abscissa values, at least for the “fill between” step. I am not
very used to do this kind of things but please find attached a script
that may be helpful to you (it produces to attached PNG, with Matplotlib
2.2). It uses Numpy to perform linear interpolation of your data;
scipy.interpolate may also be a good source of interpolation tools if
this is not good enough for you.

Best,
Adrien

PS : I also reattach the data files, to make it easier to play with the
script if somebody else wanted to propose a better solution.

On 05/25/2018 03:44 AM, Akhilesh Nautiyal wrote:

> Dear Adrien,
>
>           Thanks for the reply. I have tried all that. Actually in my
> case the two  curves have different size of abscissa and ordinates.  
> Suppose I make arrays like x1, y1 and x2, y2 from two data files
> attached in my previous mail, the arrays x1 and x2 have different size
> and the arrays y1 and y2 have different size.
> I will be grateful if you can help me how to fill the area between these
> curves n this particular case.
>
> With Regards,
> akhilesh
>
> On Thu, May 24, 2018 at 10:24 PM, [hidden email]
> <mailto:[hidden email]> <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Hi Akhliesh,
>
>     For basic usage of Matpolotlib, the following tutorials may be good
>     starting points:
>        * https://matplotlib.org/tutorials/introductory/pyplot.html
>     <https://matplotlib.org/tutorials/introductory/pyplot.html>
>        * https://matplotlib.org/tutorials/introductory/usage.html
>     <https://matplotlib.org/tutorials/introductory/usage.html>
>     To enforce peculiar x- and y-ranges, I think that you may want to
>     use `ax.set_xlim` and `ax.set_ylim` (or `plt.xlim` and `plt.ylim` if
>     you prefer the interactive Pyplot interface rather than the
>     object-oriented one).
>
>     Besides, you may find the following example useful:
>     https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
>     <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html>
>     to learn how to fill the aerea between 2 curves.
>
>     Hopefully this will help you a bit.
>
>     Best regards,
>     Adrien
>
>     On 05/24/2018 05:13 AM, Akhilesh Nautiyal wrote:
>
>         Dear Sir/Madam,
>
>                              I am plotting with matplotlib using two
>         data files with different x and y ranges. I need to fill up the
>         region between the two curves. I request you to kindly help me
>         in this regard. I am attaching the files with
>         this e-mail. the plot range should be between x->0.93 to 1.0 and
>         y->0 to 0.25.
>
>         Thanking you,
>         Sincerely,
>         akhliesh
>
>         --
>         ***********************************************************************************************
>         *    Dr. Akhilesh Nautiyal
>         *   Assistant Professor
>         *   Department of Physics
>         *   Malaviya National Institute of Technology Jaipur
>         *   JLN Marg Jaipur-302017
>         *    Mo: +91-9 <tel:%2B91-9445520847>549657939
>         ***********************************************************************************************
>
>
>         This body part will be downloaded on demand.
>
>
>
>
>
> --
> ***********************************************************************************************
> *    Dr. Akhilesh Nautiyal
> *   Assistant Professor
> *   Department of Physics
> *   Malaviya National Institute of Technology Jaipur
> *   JLN Marg Jaipur-302017
> *    Mo: +91-9 <tel:%2B91-9445520847>549657939
> ***********************************************************************************************

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users

example_akhilesh.py (1K) Download Attachment
example_akhilesh.png (36K) Download Attachment
ns_r_N_46.dat (11K) Download Attachment
ns_r_N_55.dat (13K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Help needed to fill_between two curves

Akhilesh Nautiyal
Dear Adrien,

   Thanks a lot for your kind help. With this I am getting an extra filled region as the abscissa of N_46 is getting extended. I will try to play around with this to find some solution.

Regards,
akhilesh 

On Fri, May 25, 2018 at 6:10 PM, [hidden email] <[hidden email]> wrote:
Hi Akhilesh,

Then I guess that you need to somehow interpolate your data to share the same abscissa values, at least for the “fill between” step. I am not very used to do this kind of things but please find attached a script that may be helpful to you (it produces to attached PNG, with Matplotlib 2.2). It uses Numpy to perform linear interpolation of your data; scipy.interpolate may also be a good source of interpolation tools if this is not good enough for you.

Best,
Adrien

PS : I also reattach the data files, to make it easier to play with the script if somebody else wanted to propose a better solution.

On 05/25/2018 03:44 AM, Akhilesh Nautiyal wrote:
Dear Adrien,

          Thanks for the reply. I have tried all that. Actually in my case the two  curves have different size of abscissa and ordinates.  Suppose I make arrays like x1, y1 and x2, y2 from two data files
attached in my previous mail, the arrays x1 and x2 have different size and the arrays y1 and y2 have different size.
I will be grateful if you can help me how to fill the area between these curves n this particular case.

With Regards,
akhilesh

On Thu, May 24, 2018 at 10:24 PM, [hidden email] <mailto:[hidden email]> <[hidden email] <mailto:[hidden email]>> wrote:

    Hi Akhliesh,

    For basic usage of Matpolotlib, the following tutorials may be good
    starting points:
       * https://matplotlib.org/tutorials/introductory/pyplot.html
    <https://matplotlib.org/tutorials/introductory/pyplot.html>
       * https://matplotlib.org/tutorials/introductory/usage.html
    <https://matplotlib.org/tutorials/introductory/usage.html>
    To enforce peculiar x- and y-ranges, I think that you may want to
    use `ax.set_xlim` and `ax.set_ylim` (or `plt.xlim` and `plt.ylim` if
    you prefer the interactive Pyplot interface rather than the
    object-oriented one).

    Besides, you may find the following example useful:
    https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
    <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html>
    to learn how to fill the aerea between 2 curves.

    Hopefully this will help you a bit.

    Best regards,
    Adrien

    On 05/24/2018 05:13 AM, Akhilesh Nautiyal wrote:

        Dear Sir/Madam,

                             I am plotting with matplotlib using two
        data files with different x and y ranges. I need to fill up the
        region between the two curves. I request you to kindly help me
        in this regard. I am attaching the files with
        this e-mail. the plot range should be between x->0.93 to 1.0 and
        y->0 to 0.25.

        Thanking you,
        Sincerely,
        akhliesh

        --         ***********************************************************************************************
        *    Dr. Akhilesh Nautiyal
        *   Assistant Professor
        *   Department of Physics
        *   Malaviya National Institute of Technology Jaipur
        *   JLN Marg Jaipur-302017
        *    Mo: +91-9 <tel:%2B91-9445520847>549657939
        ***********************************************************************************************


        This body part will be downloaded on demand.





--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: +91-9 <tel:%2B91-9445520847>549657939
***********************************************************************************************




--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: <a href="tel:%2B91-9445520847" value="+919445520847" target="_blank">+91-9549657939
***********************************************************************************************

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users
Reply | Threaded
Open this post in threaded view
|

Re: Help needed to fill_between two curves

vincent.adrien@gmail.com
Akhilesh,

I am not totally sure that I understand what is your remaining issue. To
me, it seems that it is just a matter of building the “correct” common
abscissa vector to pass to ``fill_between``. See for example the
attached snippet for another kind of abscissa vector that would be
possible and maybe better suited to what you want.

Regards,
Adrien

On 05/28/2018 10:50 PM, Akhilesh Nautiyal wrote:

> Dear Adrien,
>
>     Thanks a lot for your kind help. With this I am getting an extra
> filled region as the abscissa of N_46 is getting extended. I will try to
> play around with this to find some solution.
>
> Regards,
> akhilesh
>
> On Fri, May 25, 2018 at 6:10 PM, [hidden email]
> <mailto:[hidden email]> <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Hi Akhilesh,
>
>     Then I guess that you need to somehow interpolate your data to share
>     the same abscissa values, at least for the “fill between” step. I am
>     not very used to do this kind of things but please find attached a
>     script that may be helpful to you (it produces to attached PNG, with
>     Matplotlib 2.2). It uses Numpy to perform linear interpolation of
>     your data; scipy.interpolate may also be a good source of
>     interpolation tools if this is not good enough for you.
>
>     Best,
>     Adrien
>
>     PS : I also reattach the data files, to make it easier to play with
>     the script if somebody else wanted to propose a better solution.
>
>     On 05/25/2018 03:44 AM, Akhilesh Nautiyal wrote:
>
>         Dear Adrien,
>
>                    Thanks for the reply. I have tried all that. Actually
>         in my case the two  curves have different size of abscissa and
>         ordinates.  Suppose I make arrays like x1, y1 and x2, y2 from
>         two data files
>         attached in my previous mail, the arrays x1 and x2 have
>         different size and the arrays y1 and y2 have different size.
>         I will be grateful if you can help me how to fill the area
>         between these curves n this particular case.
>
>         With Regards,
>         akhilesh
>
>         On Thu, May 24, 2018 at 10:24 PM, [hidden email]
>         <mailto:[hidden email]>
>         <mailto:[hidden email]
>         <mailto:[hidden email]>> <[hidden email]
>         <mailto:[hidden email]>
>         <mailto:[hidden email]
>         <mailto:[hidden email]>>> wrote:
>
>              Hi Akhliesh,
>
>              For basic usage of Matpolotlib, the following tutorials may
>         be good
>              starting points:
>                 *
>         https://matplotlib.org/tutorials/introductory/pyplot.html
>         <https://matplotlib.org/tutorials/introductory/pyplot.html>
>              <https://matplotlib.org/tutorials/introductory/pyplot.html
>         <https://matplotlib.org/tutorials/introductory/pyplot.html>>
>                 *
>         https://matplotlib.org/tutorials/introductory/usage.html
>         <https://matplotlib.org/tutorials/introductory/usage.html>
>              <https://matplotlib.org/tutorials/introductory/usage.html
>         <https://matplotlib.org/tutorials/introductory/usage.html>>
>              To enforce peculiar x- and y-ranges, I think that you may
>         want to
>              use `ax.set_xlim` and `ax.set_ylim` (or `plt.xlim` and
>         `plt.ylim` if
>              you prefer the interactive Pyplot interface rather than the
>              object-oriented one).
>
>              Besides, you may find the following example useful:
>         https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
>         <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html>
>            
>         <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
>         <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html>>
>              to learn how to fill the aerea between 2 curves.
>
>              Hopefully this will help you a bit.
>
>              Best regards,
>              Adrien
>
>              On 05/24/2018 05:13 AM, Akhilesh Nautiyal wrote:
>
>                  Dear Sir/Madam,
>
>                                       I am plotting with matplotlib
>         using two
>                  data files with different x and y ranges. I need to
>         fill up the
>                  region between the two curves. I request you to kindly
>         help me
>                  in this regard. I am attaching the files with
>                  this e-mail. the plot range should be between x->0.93
>         to 1.0 and
>                  y->0 to 0.25.
>
>                  Thanking you,
>                  Sincerely,
>                  akhliesh
>
>                  --      
>           ***********************************************************************************************
>                  *    Dr. Akhilesh Nautiyal
>                  *   Assistant Professor
>                  *   Department of Physics
>                  *   Malaviya National Institute of Technology Jaipur
>                  *   JLN Marg Jaipur-302017
>                  *    Mo: +91-9 <tel:%2B91-9445520847>549657939
>                
>         ***********************************************************************************************
>
>
>                  This body part will be downloaded on demand.
>
>
>
>
>
>         --
>         ***********************************************************************************************
>         *    Dr. Akhilesh Nautiyal
>         *   Assistant Professor
>         *   Department of Physics
>         *   Malaviya National Institute of Technology Jaipur
>         *   JLN Marg Jaipur-302017
>         *    Mo: +91-9 <tel:%2B91-9445520847>549657939
>         ***********************************************************************************************
>
>
>
>
>
> --
> ***********************************************************************************************
> *    Dr. Akhilesh Nautiyal
> *   Assistant Professor
> *   Department of Physics
> *   Malaviya National Institute of Technology Jaipur
> *   JLN Marg Jaipur-302017
> *    Mo: +91-9 <tel:%2B91-9445520847>549657939
> ***********************************************************************************************

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users

example_akhilesh_v2.py (1K) Download Attachment
example_akhilesh_v2.png (35K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Help needed to fill_between two curves

Akhilesh Nautiyal
Dear Adrien,
 Thanks again for your kindly help. My problem is solved. I could get the plot I needed, which is attached here. I had to plot one more data file and had to use two fill_between calls. 

Regards,
akhilesh

On Wed, May 30, 2018 at 7:23 AM, [hidden email] <[hidden email]> wrote:
Akhilesh,

I am not totally sure that I understand what is your remaining issue. To me, it seems that it is just a matter of building the “correct” common abscissa vector to pass to ``fill_between``. See for example the attached snippet for another kind of abscissa vector that would be possible and maybe better suited to what you want.

Regards,
Adrien

On 05/28/2018 10:50 PM, Akhilesh Nautiyal wrote:
Dear Adrien,

    Thanks a lot for your kind help. With this I am getting an extra filled region as the abscissa of N_46 is getting extended. I will try to play around with this to find some solution.

Regards,
akhilesh

On Fri, May 25, 2018 at 6:10 PM, [hidden email] <mailto:[hidden email]> <[hidden email] <mailto:[hidden email]>> wrote:

    Hi Akhilesh,

    Then I guess that you need to somehow interpolate your data to share
    the same abscissa values, at least for the “fill between” step. I am
    not very used to do this kind of things but please find attached a
    script that may be helpful to you (it produces to attached PNG, with
    Matplotlib 2.2). It uses Numpy to perform linear interpolation of
    your data; scipy.interpolate may also be a good source of
    interpolation tools if this is not good enough for you.

    Best,
    Adrien

    PS : I also reattach the data files, to make it easier to play with
    the script if somebody else wanted to propose a better solution.

    On 05/25/2018 03:44 AM, Akhilesh Nautiyal wrote:

        Dear Adrien,

                   Thanks for the reply. I have tried all that. Actually
        in my case the two  curves have different size of abscissa and
        ordinates.  Suppose I make arrays like x1, y1 and x2, y2 from
        two data files
        attached in my previous mail, the arrays x1 and x2 have
        different size and the arrays y1 and y2 have different size.
        I will be grateful if you can help me how to fill the area
        between these curves n this particular case.

        With Regards,
        akhilesh

        On Thu, May 24, 2018 at 10:24 PM, [hidden email]
        <mailto:[hidden email]>
        <mailto:[hidden email]
        <mailto:[hidden email]>> <[hidden email]
        <mailto:[hidden email]>
        <mailto:[hidden email]

        <mailto:[hidden email]>>> wrote:

             Hi Akhliesh,

             For basic usage of Matpolotlib, the following tutorials may
        be good
             starting points:
                *
        https://matplotlib.org/tutorials/introductory/pyplot.html
        <https://matplotlib.org/tutorials/introductory/pyplot.html>
             <https://matplotlib.org/tutorials/introductory/pyplot.html
        <https://matplotlib.org/tutorials/introductory/pyplot.html>>
                *
        https://matplotlib.org/tutorials/introductory/usage.html
        <https://matplotlib.org/tutorials/introductory/usage.html>
             <https://matplotlib.org/tutorials/introductory/usage.html
        <https://matplotlib.org/tutorials/introductory/usage.html>>
             To enforce peculiar x- and y-ranges, I think that you may
        want to
             use `ax.set_xlim` and `ax.set_ylim` (or `plt.xlim` and
        `plt.ylim` if
             you prefer the interactive Pyplot interface rather than the
             object-oriented one).

             Besides, you may find the following example useful:
        https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
        <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html>
                    <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html
        <https://matplotlib.org/gallery/lines_bars_and_markers/fill_between_demo.html>>
             to learn how to fill the aerea between 2 curves.

             Hopefully this will help you a bit.

             Best regards,
             Adrien

             On 05/24/2018 05:13 AM, Akhilesh Nautiyal wrote:

                 Dear Sir/Madam,

                                      I am plotting with matplotlib
        using two
                 data files with different x and y ranges. I need to
        fill up the
                 region between the two curves. I request you to kindly
        help me
                 in this regard. I am attaching the files with
                 this e-mail. the plot range should be between x->0.93
        to 1.0 and
                 y->0 to 0.25.

                 Thanking you,
                 Sincerely,
                 akhliesh

                 --                 ***********************************************************************************************
                 *    Dr. Akhilesh Nautiyal
                 *   Assistant Professor
                 *   Department of Physics
                 *   Malaviya National Institute of Technology Jaipur
                 *   JLN Marg Jaipur-302017
                 *    Mo: +91-9 <tel:%2B91-9445520847>549657939
                        ***********************************************************************************************


                 This body part will be downloaded on demand.





        --         ***********************************************************************************************
        *    Dr. Akhilesh Nautiyal
        *   Assistant Professor
        *   Department of Physics
        *   Malaviya National Institute of Technology Jaipur
        *   JLN Marg Jaipur-302017
        *    Mo: +91-9 <tel:%2B91-9445520847>549657939
        ***********************************************************************************************





--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: +91-9 <tel:%2B91-9445520847>549657939
***********************************************************************************************




--
***********************************************************************************************
*    Dr. Akhilesh Nautiyal
*   Assistant Professor
*   Department of Physics
*   Malaviya National Institute of Technology Jaipur
*   JLN Marg Jaipur-302017
*    Mo: <a href="tel:%2B91-9445520847" value="+919445520847" target="_blank">+91-9549657939
***********************************************************************************************

_______________________________________________
Matplotlib-users mailing list
[hidden email]
https://mail.python.org/mailman/listinfo/matplotlib-users

filled_region.png (33K) Download Attachment
filling.py (1K) Download Attachment
ns_r_N_46.dat (11K) Download Attachment
ns_r_N_46_55.dat (12 bytes) Download Attachment
ns_r_N_55.dat (13K) Download Attachment